EP-430 12ton Wire Crimper 300mm2 Manual Hydraulic Crimping Tool

• 1. Design to accommodate hexagonal dies for applying compression lugs to copper, aluminum conductors.
• 2. Two stage pumping action for rapid ram advance to the connector hold position with minimum pumping action.
• 3. Manual retraction when the max pressure reached by twisting the handle.
• 4. The glass fiber operation insulates the stick, can bear the electric voltage 220kv, keeping on the minute.
• 5. 180° rotatable head.
• 6. The pressure outside the body adjusts to press the valve, don't need the whole structure to lie down.

Hydraulic crimping tools is a professional tool for crimping copper and aluminum lugs with different types, a wide range of crimping dies from 4-1000mm^2 to suit for different demand. The main crimping shape is hexagonal, special shape design is provided.

1. Design to accommodate hexagonal, dies of hydraulic tools for applying compression fittings too copper, aluminum conductors.

2. Two stage pumping action for rapid ram advance to the connector hold position with minimum pumping action.

3. Automatic retraction when the pressure of crimper tools reaches 700kg/cm2 reached.

4. The glass fiber operation insulates the stick, the crimping tool can bear the electric voltage 200KV, keeping on the minute.

5. Hydraulic tools with 180 degree rotatable head.

6. The pressure of the hydraulic tools outside the body adjusts to press the valve.

Model:EP-430(Safety valve inside)