|
| Brand Name: | XINYA |
| Model Number: | JJM-5B |
| MOQ: | 1 sets |
| Price: | US $1,400 - 2,000 / Set |
| Delivery Time: | 10 days after payment |
| Payment Terms: | L/C,T/T |
The XINYA JJM-5B is a diesel-powered cable pulling winch for power line construction and cable installation projects. Its diesel engine allows operation at outdoor sites without an electrical power supply.
With a rated pulling force of 50 kN, the JJM-5B offers different pulling-force and speed combinations to suit project requirements. Lower-speed operation provides greater pulling force, while higher-speed operation is intended for lighter pulling loads.
| Item | Specification |
|---|---|
| Brand | XINYA |
| Model | JJM-5B |
| Power Source | Diesel engine |
| Engine Model | 186F |
| Power | 10 HP |
| Rated Pulling Force | 50 kN — 5-ton class |
| Pulling Speed | 5–24 m/min, depending on operating mode |
| Overall Dimensions — L × W × H | 1,100 × 498 × 600 mm |
| Machine Weight | 137 kg |
| Packaging | Export wooden case |
| Operating Mode | Pulling Force | Pulling Speed |
|---|---|---|
| Low Speed | 50 kN | 5 m/min |
| Intermediate Speed 1 | 30 kN | 9 m/min |
| Intermediate Speed 2 | 15 kN | 14 m/min |
| High Speed | 9 kN | 24 m/min |
The pulling force and speed in each row are paired operating values. The rated 50 kN pulling force is available in low-speed operation; it is not available at the highest speed.
Operate at project locations where an electrical power supply is unavailable.
Select the pulling-force and speed combination appropriate for the installation plan.
Compare the pulling performance, engine specification, dimensions and weight before ordering.
Wooden-case packaging is provided for shipment. Final packing dimensions and gross weight are confirmed for the ordered configuration.
The JJM-5B can be considered for pulling tasks in overhead power line construction and underground cable installation, subject to a review of the project requirements.
For underground cable pulling, selection should consider:
Cable diameter and weight per metre.
Pulling distance, bends and changes in elevation.
Duct dimensions and installation method.
Cable manufacturer’s allowable pulling tension.
Pulling rope and accessory specifications.
For overhead line work, selection should consider the required pulling force, operating speed, route conditions and compatibility with the other stringing equipment.
Winch capacity alone does not determine a suitable cable pulling distance. The cable, route and complete pulling arrangement must also be considered.
Please confirm the following in your quotation:
Engine and machine configuration.
Required wire rope type, diameter and length.
Included accessories and optional spare parts.
Operating manual and technical documentation.
Inspection and test requirements.
Packaging, delivery terms and destination.
Wire rope and optional accessories should be listed separately to make the supply scope clear.
If your project requires a pre-shipment inspection, test video, inspection report or certification documents, please specify these requirements when requesting a quotation.
The quotation and order confirmation should identify the agreed inspection scope and documents applicable to the supplied model.
For maintenance or spare-parts enquiries, please provide the machine model, serial number and clear photographs of the relevant component.
For a technical fault enquiry, include a description of the operating conditions and a short video showing the issue. This information helps identify the machine configuration and the required parts.
No. The 50 kN pulling force corresponds to low-speed operation at 5 m/min. High-speed operation at 24 m/min corresponds to a pulling force of 9 kN.
The supply scope must be confirmed in the quotation. Please specify the required rope type, diameter and length.
Suitability depends on the required pulling force, cable tension limit, route and pulling arrangement. Please send your project details for review.
Please provide the model, serial number and photographs of the part to be replaced.
Please send your application, required quantity, pulling force, preferred operating speed, rope requirements and delivery destination.
For cable installation projects, please also include the cable specifications and route details so that the equipment configuration can be reviewed.
