Product Details:
|
Type: | Bending Cutting Machine | Application: | Cutting |
---|---|---|---|
Weight: | 20/27kg | Rated Output: | 230/270KN |
Package: | Wood Case | Working Stroke: | 50/70mm |
High Light: | busbar cutting machine,busbar punching machine |
Busbar Processing Machine Hydraulic Busbar Cutting Tool CWC-150
Application
This processor is suitable for making large electric cabinet ,power distribution cabinets ,switch cabinets and power transmission and distribution construction engineering construction site use.
Tools Introduction
Hydraulic Bus bar Cutting Tools for Metal Sheet Cutting Up to 12mm is a remote control tools, works with an external hydraulic pump (capable of providing 700Bar working pressure). CWC-200 is intended to be used to cut Cu/Al busbar, it's cutting capacity is 200mm*12mm (Width*Thickness). With the help of hydraulic power and sharp cutting blade, quick and clean cutting can be achieved. Cutting surface is smooth, without burr.
Characteristic
The unilateral type structure, cutting in larger power, but it does not waste materials.
The blade adopts alloy tool steel forging fine grinding, the incision is neat, no burr and no deformation.
During cutting, the copper and aluminum row should not be fixed, any position is OK.
The pressing device is equipped with the blade side in order to prevent the tilt of copper and aluminum row.
It can use with pump CFP-800-1,CP-700,EHP-70ZS,EHP--63A.
Specifications
1. Suittable for pinching holes onLandHshape iron plate,copper&aluminum busbars
2. Flat pedestal to provide steadiness in operation.
3. Punch dies made of high carbon tungesten steel and not easy towear off.
4. Easy to carry and simple to operate.
Description and function
1. manual hand pump operated, for copper pipe, steel tube, plastic water pipe
- It is suit for common water pipe, wire pipe, carbon steel pipe, conduit tube, bending the angle 90
- The upper plate of the new design is cut by one time, it won’t be broken.
This machine could bend pipes toward any direction you want;the largest bending angle is 90°
2. Suitable for use in bending brass pipes,steel pipes,hydraulic pipes,coated and uncoated pipes.
3. We can make moulds in other specifications according to customers requirements
Features
Remote Control Style: An external hydraulic pump is required (Capable of providing 700Bar working pressure). Foot hand and electric hydraulic pumps are all available in our products range
Sharp Cutting Blade: Ensure fast and clean cutting
Cutting Surface: Smooth, without burr
Portable: Can be fixed or taken to working place according to specific application
Steel Case Package: For easy carrying and protect tools well
Technical Data
Product No. | Model Type | Output (KN) | Operating stroke(mm) | Cutting Rangemm(mm) | Weight(kg) |
80109 | CWC-150 | 230 | 50 | ≤150*12 | 20 |
80110 | CWC-200 | 270 | 70 | ≤200*12 | 27 |
Detail Picture
Contact Person: Ms. Wendy
Tel: +8615050307199