|
Product Details:
|
| Rod Diameter: | 10 Mm | Material: | Fiberglass Reinforced Plastic |
|---|---|---|---|
| Color: | Yellow | Length Of Pulling Rod: | 50-300M |
| Iron Frame: | Steel With High-temperature Sprayed Plastic Or Spray Coating | Selling Point: | Electric Cable Duct Rod |
| High Light: | cable stringing equipment,conductor stringing equipment |
||
Cable Pulling Tools 10mm Cobra Conduit Duct Rods Fiberglass Duc Rod
Application
1. Used to install pulling ropes and winch ropes into ducts,ready for cable pulling operations.
2. Available push pull rodder
3. With cable roller
4. Lightweight and non-conductive
Features:
Light weight, high tensile strength.
Polyethylene coating for good electric insulativity, smooth surface, resistance to acid and corrosion.
Elastic body for easy passing through narrow pipes and bending conduits.
Copper wire inside for tracing if needed.
Good friction and heat resistance allow the rod to travel longer distance in the conduits and to be operated in harsh environment.
Meter marks on the protective layer of the rod for measuring distance, printed by professional printing machine.
Waterproof and anti-ultraviolet for durable use.
Hand operated brake for controlling payout of the pulling rod. The rotating and stopping of the rod can be easily controlled by the brake.
Some frames are double-barreled reinforcement design for a more sturdy structure.
Small bending radius allows the rod itself passing through tight bends in the ducts.
Accessory or repair kit is available attached to the frame for greater versatility and easier ducting.
Specification:
Rod diameter: 4mm - 16mm.
Length of fiberglass rod: 30m - 500m.
Working temperature: -40°C to + 80°C (-40°F to 176°F).
Minimum bend radius: 4" (That is for 4mm rod diameter, other rods with larger diameter have larger bend radius).
Max pulling strength: 4.5T (For rod diameter 16mm, other rods with smaller diameter have less pulling strength).
Frame size: 160mm × 450mm × 500mm, 170mm × 600mm × 750mm, etc. (maximum size: 550mm × 1500mm × 1600mm).
Wheel: pneumatic/iron tyre or no wheel.
Fiberglass rod color: yellow, blue, white, red, black.
Package: plastic wrap and then into carton.
Operation instruction: see the Technology page.
Note: we offer various sizes and colors for any specific requirement as customers' demand.
| 1 - Glass Reinforced Composite core: | ||||||||
| General properties | ||||||||
| Property | Value | |||||||
| Iner core | E-Glass Fiber | |||||||
| Glass Content of Inner Part | 75-80% | |||||||
| Material of Pulling Rod | Epoxy fiber glass (inner) | |||||||
| High density Polyethylene(outer) | ||||||||
| Density | ＞1.9 gr/cm3 | |||||||
| Diameter Tolerance | ± 0.10mm | |||||||
| Work situation temperature | - 40 0C to +800C | |||||||
| Mechanical properties | ||||||||
| Property | Value | |||||||
| Minimum pulling strength | 4000 N±5% | |||||||
| Tensile Modulus | ＞30000 Mpa | |||||||
| Consistency of rod | 150gr/m±5% | |||||||
| Flexural Modulus | ＞30000 Mpa | |||||||
| Elongation at Break | 2.5-3% | |||||||
| 2 - Polyethylene cover | ||||||||
| Material: | ||||||||
| Medium Density Polyethylene Resin for the insulating and jacketing of Telecommunication Cables. | ||||||||
| Property | Value | |||||||
| Tensile Strength | ＞15N/mm2 | |||||||
| Environmental Stress & crack resistance | >1000 hr. | |||||||
| Heat Stability | OK. | |||||||
| Carbon Black | OK. | |||||||
Contact Person: Ms. Wendy
Tel: +8615050307199
