|
Product Details:
|
| Max Output: | 70 Mpa | Usage: | Supply Power |
|---|---|---|---|
| Lower Pressure: | 7-10 Mpa | Selling Point: | Electric Hydraulic Pump |
| Application: | Power Construction | Product: | High Pressure Electric Hydraulic Pump |
| Highlight: | hydraulic wire cutter,hydraulic crimp tool |
||
High Pressure Electric Hydraulic Pump Transmission Line Stringing Tools With Solenoid Valve
Introduction
1 Electormagnetic Valve control to withdraw piston in any position.
2 High and low speed two stage design is for quick oil output.turbine oil absorption could ensure reaching MAX.effective oil volume.
3 Over pressure safety valve unit could avoid over pressure damage AT 700kg/cm2,automatically release.
4 Oil pipe fitted with quick couping be ordered for any length.
5 Oil pipe couping fitted with PT3/8" therad.
6 We have attractive and reasonable price.
Features
On both ends of the low end of the high output, large amount of oil;Low pressure use plunger type, improve the effective pressure;Dual active, electromagnetic wired remote control, can solve the problem of large tonnage, long type hydraulic cylinder which reset too slow;Pressure overload protection device, avoid overpressure and damage the equipment;Automatic the pressure, make sure won't leak when using;Equipped with pressure capacitor, pressure in place can control the oil pump stop working.
Technical Data
| Max.Output Pressure(kg/cm2) | 700 |
| Flow Rate(L/min) |
Low pressure:3.5 High pressure:0.52 |
| Output Pressure(kg/cm2) |
Low pressure:0-20 High pressure:20-700 |
| Oil Capacity(L) | 2.7 |
| Revolutions Per Minute(rpm) | 2800 |
| Power(W) | 1300 |
| Weight(KG) | 17.5 |
| Size(MM) | 255x190x420 |
Contact Person: Ms. Wendy
Tel: 86-15050307199
Fax: 86-512-52844879
